When buyers ask for a fishing net quotation, they often focus first on:
Mesh size
Net dimensions
Material
But twine specification is another critical part of the product.
Two nets with the same mesh size and dimensions can still be very different if the twine construction is different.
The key principle is:
Fishing net performance and cost depend not only on mesh size, but also on the twine specification used to build the net.
Twine affects:
Net weight
Handling
Material consumption
Production cost
Finished construction
This is why a professional manufacturer usually asks for the twine specification before giving a final quotation.
Some buyers specify twine by diameter.
For example:
1.0 mm
1.5 mm
2.0 mm
This is easy to understand, but diameter should still be treated carefully.
Different twine constructions may not behave exactly the same even if their measured diameters are similar.
Nylon fishing nets are often described using denier-based specifications.
For example:
210D/30
The exact meaning should be understood within the supplier's production system.
For B2B orders, it is better to provide the original denier specification when available instead of converting it informally into a diameter.
Some netting products may be described using:
Ply
Strand count
Twine number
These terms can vary between suppliers and markets.
The manufacturer should confirm what the buyer means before production.
A common mistake is to assume:
Thicker twine = better fishing net
In reality, thicker twine may also increase:
Product weight
Handling difficulty
Material cost
Water resistance
The suitable twine should match the actual application.
A small mesh with very thick twine can create a dense and heavy construction.
A larger mesh with lighter twine creates a different balance.
The correct combination depends on:
Application
Required handling
Installation
Target cost
This is why factories evaluate mesh and twine together.
A 2.0 mm PE twine and a 2.0 mm nylon twine should not automatically be treated as identical products.
Different materials can have different:
Flexibility
Density
Handling
Surface characteristics
Twine size should always be read together with the material.
For otherwise similar netting:
Thicker twine generally uses more material
Heavier construction generally increases net weight
This can affect:
Price per roll
Price per square meter
Freight
This is why the twine specification matters commercially as well as technically.
If a buyer only says:
“50 mm PE fishing net”
the factory still cannot calculate an accurate price.
The quotation may change significantly depending on whether the twine is:
Light
Medium
Heavy
A complete twine specification reduces repeated revisions.
Camera distance and lighting can make twine appear thicker or thinner.
A product photo can help identify general construction, but it cannot reliably replace:
Diameter
Denier
Physical sample
This is especially important for replacement orders.
An old fishing net may have experienced:
Compression
Abrasion
Flattening
Surface wear
This can affect the apparent diameter.
If possible, buyers should combine old-sample measurements with original records.
If diameter is being used as the control value, do not rely on one single measurement.
Check several locations.
This helps reduce the effect of:
Local flattening
Compression
Measurement variation
A factory can then work with a more representative target.
Once confirmed, the same twine description should appear in:
Quotation
Sample approval
Purchase order
Production sheet
This prevents production from relying on memory or informal chat.
A buyer may say:
“Same as last order.”
But a better repeat-order reference is:
Same approved material, mesh, and twine specification as Rev. 02
This helps maintain consistency.
If the buyer does not know the original twine specification, a professional factory can discuss options based on:
Application
Mesh size
Target dimensions
Budget
Reference sample
This makes factory-direct technical communication especially valuable for custom netting.
For a clearer quotation, provide:
Material
Mesh size
Mesh measurement method
Twine diameter or denier
Ply or strand count if known
Knot type
Net dimensions
Quantity
Application
If the twine specification is unknown, provide:
Close-up photos
Physical sample
Approximate diameter
Existing purchase records
“Please quote 50 mm PE fishing net, 5 × 100 m.”
The factory still needs to know:
What twine size?
What knot type?
What quantity?
Material: PE
Mesh: 50 mm, knot-to-knot
Twine: 2.0 mm
Construction: Knotted
Size: 5 m × 100 m
Quantity: 200 rolls
Color: Green
Now the manufacturer has a much clearer basis for production and pricing.
Clear twine specifications help buyers receive:
More accurate quotations
Better supplier comparisons
More consistent repeat orders
Fewer production misunderstandings
They also make it easier to compare products on the same technical basis.
A professional fishing net factory should not quote only from mesh size and dimensions.
It should also confirm:
Material + Mesh + Twine + Construction + Quantity
because these variables directly affect production.
A fishing net is built from a combination of specifications.
The key principle is:
Fishing Net Specification = Material + Mesh + Twine + Construction + Dimensions + Quantity
At PL Fishery, we manufacture PE fishing nets, nylon fishing nets, aquaculture netting, fish cage panels, reinforced netting, commercial net rolls, marine ropes, repair twine, and customized net products.
For a faster and more accurate quotation, send PL Fishery your material, mesh size and measurement method, twine diameter or denier, dimensions, knot type, quantity, color, application, and destination. If the original twine specification is unknown, our factory can also work from photos, samples, and existing product records to help clarify the requirement.https://plfishery.com/
