WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

Aquaculture Nets Keep Tearing, Fouling, or “Rotting”? Three Selection Tips That Could Help Them Last Three Years Longe

By plfishery July 15th, 2026 157 views
Catalog

In aquaculture, a net may look like nothing more than a barrier around fish or shrimp. In reality, it performs several important functions at the same time: preventing escapes, separating stock, supporting weight, allowing water exchange, and resisting waves and currents.

Many fish farmers face similar problems:

A newly purchased net begins to fuzz or break after only a short period. The mesh quickly becomes blocked by algae. Edges and seams split repeatedly. The net looks thick, but its service life is still disappointing.

Some people simply blame salty seawater, strong sunlight, or the fact that fishing nets are consumable products.

These explanations are partly correct, but they do not tell the whole story.

The lifespan of an aquaculture net depends not only on water quality, sunlight, waves, biofouling, and daily handling, but also on how the net was selected in the first place.

If the material, mesh size, or structure is unsuitable, even careful maintenance may not solve the problem. When the right net is chosen and used correctly, its working life can be significantly extended.

The phrase “last three years longer” does not mean that every net will automatically gain exactly three extra years. It means reducing avoidable wear, clogging, and localized damage so that a net designed for long-term use can come closer to its intended service life.

The following three selection tips are the key to lowering long-term costs.

1. Choose the Right Material First—Do Not Judge Only by Twine Thickness

When buying aquaculture netting, many farmers first touch the twine and ask:

“This one feels thicker. Does that mean it will last longer?”

Twine thickness does affect strength, but it is not the only factor.

A net’s service life also depends on material consistency, flexibility, abrasion resistance, twisting structure, and resistance to aging.

Common materials for aquaculture nets include polyethylene, polypropylene, nylon, and polyester. Each material has different characteristics.

Some materials are lightweight and suitable for large enclosure nets. Some are more flexible and can absorb part of the impact caused by fish movement. Others offer better dimensional stability and are less likely to deform under long-term tension.

When selecting a material, consider the following questions.

Is the net used in seawater or freshwater?

Seawater contains salt and often supports algae, shellfish, and other organisms that attach to submerged surfaces. Nets used in marine environments must withstand long-term immersion, abrasion, and repeated cleaning.

Freshwater has less salt, but pond mud, algae, and organic matter can still block and contaminate the net.

The important question is not simply whether the material can get wet. It is whether it is suitable for continuous underwater use.

Will the net be lifted and moved frequently?

If the net must be raised, cleaned, transferred, or replaced often, the material should not be excessively stiff.

Twine that is too hard may feel strong, but repeated folding can create fatigue at fixed bending points.

Twine that is too soft and loosely constructed may deform or tangle easily.

A good net for frequent handling should balance strength and flexibility.

Are the diameter and strand count consistent?

Some nets look thick in one area but are uneven across the entire panel. Some twines look bulky but have a loose internal structure.

When inspecting a net, check several areas and look for:

  • Consistent twine thickness

  • Compact strand construction

  • Minimal fuzzing

  • Even twisting

  • No thinning around knots

  • Proper matching between edge twine and main netting

A durable net should not only look thick. Its material and construction should be consistent throughout.

2. Smaller Mesh Is Not Always Safer—Match It to the Growth Stage

A common misconception is that smaller mesh always provides better protection because fish are less likely to escape.

In reality, mesh that is too small is more likely to foul, clog, and create greater water resistance.

When an aquaculture net remains submerged, algae, mud, shellfish, and other organisms gradually attach to the twine.

With dense mesh, these deposits connect more easily and can eventually block water flow.

This may cause:

  • Reduced water exchange inside and outside the cage

  • Lower oxygen availability

  • Increased net weight

  • Greater pressure on ropes and frames

  • More frequent cleaning

  • Higher resistance during waves and currents

Mesh size should therefore match the body size and growth stage of the cultured species.

Juvenile stage

Small fish require smaller mesh to prevent escape.

However, small-mesh nets must be inspected and cleaned more frequently because they foul quickly.

Intermediate growth stage

As the fish grow, farmers can gradually change to larger mesh.

Larger mesh usually improves water exchange and reduces fouling and water resistance.

Market-size stage

Once the fish are clearly larger than the mesh openings, there is no need to continue using overly dense netting.

Small mesh at this stage only increases maintenance work and places more load on the cage system.

Experienced farmers do not always use one net from the juvenile stage until harvest. They adjust mesh size as the stock grows.

This requires better planning, but it can reduce hidden costs caused by cleaning, breakage, and excessive water resistance.

3. Inspect Edges, Seams, and Fixing Points—Not Just the Main Netting

Many buyers carefully inspect the large central area of the net while overlooking the places most likely to fail.

The true weak points of aquaculture nets are often located at:

  • Edges

  • Corners

  • Seams

  • Fixing rings

  • Rope connection points

  • Bottom sections

  • Areas that rub against frames

The center of the net generally experiences relatively even pressure from water and fish.

Edges and connection points carry concentrated loads.

If these areas are not properly reinforced, even a strong net panel may split quickly.

Check whether the edge rope is stable

The edge rope transfers and distributes tension.

If it is too thin, loose, or unevenly attached, repeated movement in waves can tear the outer section of the net.

Check whether seams are even

Large aquaculture nets are often assembled from several panels.

If the mesh counts on both sides are mismatched, the seam twine is too weak, or the stitching tension is uneven, folds and stress concentrations may form.

These defects may be difficult to see on land but become much more serious after the net is submerged.

Check whether high-wear areas are protected

When the net rubs repeatedly against metal frames, wooden posts, floating pipes, or ropes, the main twine gradually wears thinner.

If these areas have no sleeves, reinforcement ropes, or extra netting layers, damage can develop quickly.

Many cases of so-called “rotting nets” are not caused by true decay. They result from repeated abrasion that causes fuzzing, broken filaments, and holes.

A good long-term aquaculture net should therefore reinforce critical areas rather than simply making the entire net unnecessarily thick.

Why Do Aquaculture Nets Foul So Easily?

Biofouling does not automatically mean the net is poor quality.

Any net that remains submerged in natural water can develop biological growth.

Fouling usually occurs more quickly when the water is warm, nutrient levels are high, and water movement is weak.

A rough surface with many loose fibers provides more places for algae and small organisms to attach.

Smaller mesh also allows deposits to connect more easily and form blockages.

Reducing fouling therefore requires three approaches:

  • Choose netting with a smooth, consistent surface

  • Select an appropriate mesh size for the fish

  • Establish a regular cleaning and rotation schedule

There is no ordinary aquaculture net that will never foul.

The practical goal is to slow down attachment, make cleaning easier, and prevent fouling from reaching a level that affects water flow and structural safety.

Why Do Nets Appear to “Rot”?

Synthetic-fiber nets do not rot as easily as cotton or other natural fibers.

When farmers describe a net as “rotting,” they are usually referring to one or more of the following problems.

Material aging

Long-term exposure to ultraviolet radiation, heat, and repeated bending can make the twine hard and brittle.

Surface abrasion

Sand, shells, frames, and ropes repeatedly rub against the net and break individual filaments.

Excessive local tension

Overtight installation, too few fixing points, or uneven loading may cause certain sections to fail early.

Excessive fouling weight

Large amounts of algae and shellfish add weight and increase resistance during waves and currents.

Aggressive cleaning

Sharp tools or forceful scraping can damage the twine directly.

What people call a “rotted net” is often the combined result of aging, abrasion, fouling, and improper handling.

After Choosing the Right Net, Do These Five Things

Selecting the correct net is only the first step.

To help it last longer, daily management is equally important.

1. Do not install the net too tightly

A net should have suitable tension, but tighter is not always better.

Constant excessive tension keeps the twine under high load. When waves or fish impacts occur, it is more likely to break suddenly.

2. Reduce direct contact with hard surfaces

Inspect frames, wooden posts, and metal fittings for sharp edges.

Protect high-friction areas with sleeves, soft rope, or additional netting.

3. Clean fouling regularly

Do not wait until the mesh is completely blocked.

Timely cleaning reduces weight and water resistance and makes hidden damage easier to find.

4. Repair small holes immediately

A small hole can quickly expand under water flow and fish movement.

Use repair twine with a material and diameter similar to the original net and restore the original mesh structure as closely as possible.

5. Rotate with spare nets

A spare net allows the active net to be removed for cleaning, drying, and inspection.

Rotation requires more initial investment, but it reduces the risk of emergency failures and urgent replacement.

Lasting Three Years Longer Does Not Mean Buying the Most Expensive Net

A high price does not automatically mean a net is suitable, and a low price does not always mean poor quality.

The right aquaculture net should match:

  • The cultured species

  • Fish size

  • Water conditions

  • Currents and waves

  • Operating depth

  • Cleaning frequency

  • Fixing structure

  • Expected service period

Choosing the thickest net may increase weight and handling difficulty.

Choosing the smallest mesh may increase fouling.

Choosing only by price may cause buyers to overlook edges, seams, and material consistency.

Good net selection means spending money on the areas that truly affect safety and service life.

Conclusion

Aquaculture nets do not tear, foul, or appear to “rot” only because the aquatic environment is harsh.

Many of these problems begin at the purchasing stage.

The wrong material may age quickly. Mesh that is too small may foul and clog more severely. Weak edges and seams may fail repeatedly.

To extend net life, remember three core principles:

Choose the right material, match the mesh size, and inspect the reinforcement structure.

Then combine these choices with proper installation, regular cleaning, prompt repairs, and spare-net rotation.

The value of a good aquaculture net is not simply how strong it looks when it is new.

Its true value is whether it can maintain a stable structure after long-term immersion, waves, fouling, and repeated handling—protecting both the stock and the farmer’s investment.

Leave a message
Name
Email *
Message
Message Us