WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

How Custom Mesh and Twine Sizes Shape a Danish Seine Net

By plfishery November 17th, 2026 8 views
Catalog

Introduction: Mesh size and twine size are the two most-quoted numbers on a Danish seine net, and the two most often confused, so it helps to know what each one actually describes.

Most people meet these two figures at the same moment: reading a quote, a specification sheet, or a product listing where the mesh field says "custom" and the twine field says "as requested". That wording can feel like a non-answer, but it is actually telling you something important about how a Danish seine net is built. Neither figure is a shelf label. Both are inputs that get settled together, along with the section of the net they belong to and the way the gear is fished. Once you can separate the opening from the line, and read both against the net's layout, a custom specification stops looking vague and starts looking like a design conversation.

Why One Mesh Number Rarely Tells the Whole Story

A single mesh number feels reassuring because it looks like a specification you can compare across suppliers. In a Danish seine net, though, that number only means something once you know which panel it belongs to. The gear is not one flat sheet of netting. It is a working assembly of wings, a net body, and a codend, and each of those parts is asked to do a different job during the tow. The wings herd fish toward the opening, the body guides them along, and the codend holds what has been caught. Netting that suits one of those jobs is not automatically the right netting for another. Twine size is what makes the single number even less useful on its own. Two nets can carry the same mesh opening and still behave like different pieces of equipment, because the line that forms the mesh changes how the panel hangs, how much water it pushes, and how it responds when it touches rough ground. A mesh figure with no twine figure beside it describes half a panel. FAO's gear classification pages are useful here precisely because they treat seine nets as a gear family with defined structural parts, not as a single mesh measurement. There is a second layer to the confusion: measurement convention. Mesh opening can be described in more than one way depending on the trade or the document, so a bare number can even mean slightly different things in two different quotes. The practical habit that solves this is simple. Whenever a mesh figure appears, look for three companions: which section it applies to, what twine sits in that section, and how the opening was measured. If those are missing, the number is a starting point, not a specification.

How Mesh Size and Twine Size Describe Different Parts of the Net

The cleanest way to keep the two terms apart is to remember that one describes a space and the other describes a line. They are recorded separately because they answer separate questions, and they are recorded together because the answers only work as a pair.

  • Mesh opening. Mesh size refers to the opening itself — the distance across the mesh, normally described between knots or between the centres of adjacent knots. That opening governs what passes through the netting and what is held, so it is a property of the space rather than of the material around it.
  • Twine construction. Twine size describes the line that forms the mesh: how thick it is, how many strands go into it, and how those strands are twisted or braided. Change the twine and you change how the panel hangs, how supple it feels, and how it copes with contact against the seabed.
  • Section relationship. The same two figures read differently depending on where they sit. A wing that herds fish and a codend that retains the catch are not doing the same work, so mesh and twine are usually recorded section by section instead of once for the whole net.

Read together, those three points explain why "custom" appears in both fields. A net built for near-bottom work has to balance an opening that releases what should not be retained against twine that keeps the panel intact through the tow. Tighten the opening and you change the water flow through the netting; thin the twine and you change how the panel moves. Neither adjustment happens in isolation, and neither is decided by a catalogue range.

How Custom Mesh and Twine Questions Move Toward a Confirmed Net Design

In a real net-design conversation, the mesh and twine questions usually arrive after the drawing or sample is already on the table. Someone lays out the layout of the wings, body, and codend, and then the discussion moves panel by panel: what opening goes here, what line goes with it, and how does that pair match the fish being targeted, the vessel that will haul the gear, and the ground being worked. FAO's description of Danish seining as a rope-and-net operation, where the warps and the net work together to concentrate fish, is a good reminder that no panel is designed in a vacuum. This is also where the custom wording earns its place. When a commercial danish seine net manufacturer lists mesh and twine as custom or as-requested fields, the honest reading is that the combination is confirmed against a brief rather than picked from a fixed menu. A reference drawing, an existing net, or a physical sample carries information that numbers alone cannot: how the panels taper, how the sections join, how much netting is hung where. That is why quotes for wholesale danish seine fishing nets are typically built around a drawing rather than around two figures typed into an order form. For a buyer learning the terminology, the useful mental model is this: mesh and twine are specification inputs, and inputs need a target. Target species, vessel size and hauling method, seabed conditions, and the reference drawing or sample all shape the final pair. A danish seine net supplier that asks for those details before quoting is doing the same work a designer would. Plfishery's product reference, for example, lists mesh size and twine size as custom fields and notes that mesh can vary by net section — which is exactly the shape of answer you would expect when the combination is confirmed rather than stocked.

Conclusion

Mesh size and twine size describe two different things: an opening and a line. Confusing them leads to quotes that look comparable but are not, because a panel's behaviour depends on the pair, not on either figure alone. Once you know that mesh can vary by section and that twine sets how each panel hangs and wears, the word "custom" stops being a gap in the information and becomes a description of the process. The practical takeaway is to always read the two figures with the section they belong to and the operation they serve — that habit alone makes specification sheets far easier to compare.

FAQ

Q: What is the difference between mesh size and twine size in a Danish seine net?

A: Mesh size describes the opening — the distance across the mesh, usually measured between knots or knot centres — and it governs what passes through the netting and what is retained. Twine size describes the line itself: its thickness, strand count, and how those strands are twisted or braided. One is a space, the other is a line, which is why they are listed as separate fields.

Q: Can mesh size change between sections of a Danish seine net?

A: Yes. Mesh is commonly varied by net section, because wings, net body, and codend do different jobs during the tow and therefore do not need the same opening. Which sections differ, and by how much, is settled against the net's layout and the fishing conditions rather than by a single figure applied to the whole net.

Q: Why does a custom Danish seine net need a drawing or sample reference?

A: Because two numbers cannot carry the layout. A drawing or sample shows how panels taper, how sections join, and how much netting is hung where, so mesh and twine can be matched to the actual structure. That reference is what turns a custom field into a buildable specification instead of an approximation.

Sources / References

FAO: Fishing Gear Types - Danish Seines

FAO: Fishing Gear Types - Seine Nets

European Commission: Technical Measures

Related Examples

PLFISHERY Danish Seine Net

Leave a message
Name
Email *
Message
Message Us