A fish cage may look large on a technical drawing.
For example, a cage may be designed with a specific:
Length
Width
Depth
Total volume
Based on these dimensions, farmers calculate:
Stocking density
Fish biomass
Feeding plans
Production capacity
But there is an important problem.
The net cage does not always keep its designed shape underwater.
Currents, waves, biofouling, fish movement, insufficient weighting, and installation conditions can cause the net to deform.
When the side walls move inward or the bottom rises, the actual space available to fish becomes smaller.
This means the real operating volume of a fish cage may be significantly lower than its theoretical design volume.
For aquaculture operators, this hidden loss of space can influence fish welfare, oxygen availability, stocking density, net stress, and overall farm performance.
A fish cage is usually designed according to specific dimensions.
For a simple rectangular cage, volume is based on:
Length × Width × Depth
If the net maintained a perfect shape at all times, calculating usable space would be straightforward.
But flexible netting moves underwater.
As soon as currents begin pushing against the cage, the structure may change shape.
The result is:
Designed Volume ≠ Actual Operating Volume
That difference can become important in high-density aquaculture.
Fish cage netting is flexible by design.
This makes it:
Easier to install
Easier to handle
More adaptable to water movement
But flexibility also means the net responds to environmental forces.
Common causes of deformation include:
Water currents
Waves
Biofouling
Inadequate weights
Uneven tension
Mooring movement
These forces can gradually push the cage away from its intended geometry.
Water moving through a cage creates drag on the netting.
As current speed increases, pressure on the net also increases.
The current-facing side may be pushed inward.
Instead of remaining vertical, the net may:
Bow
Curve
Lean
This reduces internal space.
The stronger the current, the greater the potential deformation.
In severe current conditions, deformation can affect more than one side.
The cage may become:
Narrower
Shallower
More irregular
Fish then have less swimming space than the original cage dimensions suggest.
A cage designed for a certain biomass may suddenly be operating with a much higher effective stocking density.
Deformation does not only happen on the sides.
The bottom of the cage can also move upward.
This may happen because of:
Water flow
Insufficient weighting
Uneven tension
If the bottom rises, cage depth decreases.
Even a moderate reduction in depth across a large cage can remove a significant amount of usable volume.
Imagine a cage is stocked according to its theoretical volume.
If deformation reduces the actual volume while fish biomass remains the same, the effective stocking density increases.
That means:
Same Number of Fish + Less Space = Higher Real Stocking Density
This can affect:
Fish movement
Water quality
Oxygen demand
Feeding behavior
A farm may believe it is operating at one stocking density while the fish are actually experiencing another.
Fish need three-dimensional space.
When nets move inward, swimming patterns may change.
Fish may become more concentrated in:
Central areas
Areas with better water flow
This can increase:
Fish-to-fish contact
Fish-to-net contact
Crowding
The problem may become more serious as fish grow.
Juvenile fish occupy relatively little physical space.
As they grow, total biomass increases dramatically.
A small loss of cage volume that seemed unimportant early in the production cycle may become much more significant later.
This is why cage deformation should be considered based on:
Final fish size
Maximum biomass
not only initial stocking conditions.
A fish cage is designed to allow water exchange through the mesh.
When the net deforms, the flow pattern may change.
Some areas may receive:
Stronger flow
while others experience:
Reduced circulation
Dead zones
Uneven flow can affect:
Oxygen distribution
Waste removal
Fish distribution
The cage is no longer operating according to its original geometry.
Higher effective stocking density means more fish are sharing less space.
Their oxygen demand does not decrease just because the cage becomes smaller.
If water exchange is also reduced, oxygen availability may become more challenging.
This is particularly important during:
Warm weather
Low-oxygen periods
High biomass stages
Cage volume and water exchange should therefore be considered together.
Marine fouling may include:
Algae
Barnacles
Mussels
Other organisms
As fouling accumulates, mesh openings become partially blocked.
This increases drag.
A clean net may allow water to pass relatively easily.
A heavily fouled net behaves more like a solid barrier.
The result can be:
More Fouling → More Drag → More Deformation → Less Cage Volume
This is one reason net cleaning is important for more than hygiene.
Mesh size affects water resistance.
Smaller mesh generally means:
More material in the water
Less open area
Greater resistance
This can increase deformation under strong currents.
However, mesh must still be small enough to contain the fish.
The best specification balances:
Containment + Water Exchange + Structural Performance
Heavy-duty nets use thicker twine for greater strength.
That can be beneficial.
However, thicker twine also increases surface area exposed to moving water.
This may increase:
Drag
Net loading
Deformation
Therefore, the heaviest possible net is not always automatically the best choice.
Net design must consider both strength and hydrodynamic behavior.
Weights are commonly used to help keep nets extended.
A proper weighting system can help maintain:
Side shape
Bottom depth
Internal volume
If weights are insufficient, the net may:
Rise
Fold
Move inward
Correct weighting depends on the cage design and environmental conditions.
Simply adding more weight is not enough.
Weight must be distributed appropriately.
If one part of the cage has much more tension than another, the net may deform unevenly.
This can create:
Distorted corners
High-stress zones
Balanced installation is essential.
Water flow around a cage is complex.
The upstream side may experience very different forces from:
Downstream side
Bottom section
As a result, the cage may twist or become asymmetrical.
This means real volume is not always easy to calculate using simple dimensions.
Currents may create relatively continuous loading.
Waves add repeated movement.
The net may:
Move inward
Recover
Move again
This creates changing cage geometry.
Fish therefore experience a living space that can continuously expand and contract.
As internal volume decreases, fish may swim closer to the cage walls.
This can increase contact with the net.
Repeated contact may contribute to:
Scale damage
Skin abrasion
Net wear
The risk depends on:
Species
Fish size
Net material
Stocking density
Maintaining cage shape helps preserve better swimming space.
Severe deformation may push the cage net closer to the fish.
If external predators approach the cage, reduced distance between fish and the outer boundary may increase risk.
Some aquaculture systems use separate predator nets for additional protection.
Cage geometry therefore also affects biosecurity.
When a cage loses its intended shape, force is no longer distributed exactly as designed.
Some areas may carry more tension.
High-stress zones often include:
Corners
Attachment points
Border ropes
These areas may wear faster.
Repeated deformation can therefore reduce both:
Cage volume
Net service life
When side panels bow inward, tension may transfer toward corners.
This can increase load concentration.
Inspect corners for:
Fraying
Distorted mesh
Broken strands
Damaged attachments
These areas often provide early warning signs of structural problems.
Fish distribution influences feeding behavior.
If usable space becomes smaller or flow becomes uneven, fish may gather in particular areas.
This can create:
Uneven feeding
Increased competition
Farmers may need to consider cage geometry when evaluating feeding performance.
Suppose a farm calculates stocking density using the original cage volume.
If the cage loses a significant portion of that volume under normal currents, the real density is higher.
This means production planning based only on design dimensions may underestimate actual crowding.
For high-density farming, real operating conditions matter more than brochure dimensions.
Signs may include:
Side nets bowing inward
Bottom rising
Cage depth changing
Fish crowding
Underwater cameras or diver inspection may provide better information.
Surface appearance alone may not show the full shape of the submerged net.
A useful approach is to observe the cage under different conditions.
Compare:
Does the net maintain its designed shape?
How much do the side walls move inward?
This helps identify how dynamic the real cage volume is.
Fouling management is one of the most practical ways to reduce excessive deformation.
A cleaner net usually provides:
Better water flow
Lower drag
Cleaning schedules should consider:
Season
Water temperature
Fouling rate
Current conditions
Waiting until the mesh is heavily blocked may increase both hydrodynamic load and maintenance difficulty.
Net selection should consider:
Fish size
Mesh size
Twine diameter
Current speed
Cage dimensions
The goal is not simply to choose the strongest net.
It is to choose a net that balances:
Containment + Strength + Water Flow + Manageable Drag
A cage that works well in calm coastal water may behave very differently offshore.
Before selecting the system, consider:
Typical current speed
Peak current events
Wave exposure
Fouling conditions
Environmental conditions should influence both:
Cage structure
Net specification
The net cannot maintain shape by itself.
Regularly check:
Weights
Ropes
Clips
Attachments
A damaged component can allow part of the net to collapse or deform.
System maintenance is essential for maintaining volume.
Stocking plans should not assume the cage always maintains 100% of theoretical volume.
In high-current environments, operators may need a safety margin.
This provides additional room for:
Fish growth
Environmental changes
Temporary deformation
A more conservative stocking strategy can improve operational resilience.
A large cage on paper does not guarantee a large usable space underwater.
The real question is:
How much volume does the cage maintain during actual operating conditions?
That is what fish experience every day.
For aquaculture performance, real operating volume is more meaningful than theoretical dimensions alone.
Fish cage nets are flexible structures.
Underwater, they continuously respond to:
Currents
Waves
Fouling
Weighting
When the net deforms, the cage can lose part of its usable volume.
This can increase:
Effective stocking density
Crowding
Fish-to-net contact
while also changing:
Water flow
Load distribution
For reliable aquaculture performance, operators should consider:
Net Strength + Mesh Size + Hydrodynamic Drag + Weighting + Real Cage Shape
not simply length, width, and depth on a specification sheet.
At PL Fishery, we manufacture PE aquaculture nets, fish cage nets, fishing nets, marine netting, fishing ropes, and customized netting solutions for different farming environments.
Need to buy or customize fish cage netting for specific cage dimensions, fish species, mesh requirements, or current conditions? Contact us with your project details, and our factory team can help recommend or develop a suitable netting solution.https://plfishery.com/