WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

Wings, Net Body, and Codend in a Danish Seine Net

By plfishery November 17th, 2026 11 views
Catalog

Introduction: A Danish seine net reads as three connected modules — wings, net body, and codend — and knowing what each one does makes a finished scope far easier to judge.

A Danish seine net looks complicated when it is laid out on a quay: long side panels, a tapering middle, and a bag at the end, all joined into one piece of gear. Reading it in order — wing ends first, codend last — turns that pile into a small map of three parts. Each part does a different job, and each one connects to the next in a predictable direction. Once a reader can name those sections, product descriptions and specifications become much easier to compare, because the question shifts from "how big is the net" to "which sections am I actually looking at".

Read the Net from Wing Ends Toward the Codend

The cleanest way to read a Danish seine net is to start at the outermost edge of a wing and follow the netting inward. Wings are the two long side panels that sit at the outer edges of the gear. Their job is to cover ground and herd: as the gear closes, the wings sweep a wide area and steer fish toward the opening instead of letting them slip sideways past the gear. The outer end of a wing is the first part of the net that meets the working area, which is why wing length and panel shape are usually the first things discussed when a design is adapted to a particular vessel or fishing ground. Keep following the netting and you reach the net body, the broad middle section that sits between the two wings and narrows as it runs toward the back. The body is the shaping section. It turns a wide swept opening into a controlled funnel, and it is where most of the net's taper, panel count, and depth are expressed. At the far end sits the codend, the closed collection point where the catch gathers and from which it is lifted. A useful way to hold the three roles in your head: wings herd, body guides, codend holds. FAO describes Danish seining as surrounding a patch of seabed with the net and ropes and then hauling until the gear closes on the fish, and the section order follows that same flow, from the wide herding end to the collecting bag.

How the Three Main Parts Work as One Net Body

Splitting the net into sections is a description habit; the sections themselves are designed to act as one piece of gear. What matters when reading a design is how the three parts cooperate, because a change in one section usually shows up as a change in the behaviour of another. Three things happen at once.

  • Section connection: the inner edge of each wing joins the outer edge of the body, and the body narrows into the codend. Because wings, net body, and codend are produced as sections and then brought together, the join lines and taper points are where the assembly takes its final shape.
  • Net shape: wings set the span of the opening, the body sets the depth and the funnel, and the codend sets the holding volume. A longer wing or a deeper body changes how the gear behaves, so shape is a whole-net decision rather than a single panel choice.
  • Fish concentration: herding, guiding, and holding happen in sequence. Wings move fish inward, the body keeps them moving toward the narrow end, and the codend collects them. When one stage is mismatched, the effect shows up at the next one.

Read together, those three functions explain why net depth and net length are usually discussed as a pair. Depth controls how much of the near-bottom water the gear covers; length controls how much ground the wings and body sweep. Neither number means much on its own, which is why a custom danish seine fishing net is normally built from a design rather than picked from a size chart.

Where Finished Assembly Scope Needs Clear Wording

Module descriptions and finished assembly sit at two different levels, and mixing them up creates most of the confusion around Danish seine net listings. Wings, net body, and codend are described as producible sections: each one can be built as a component. A finished net assembly is the next level up, where those sections are joined and handed over as a single net. Its exact configuration comes from a confirmed drawing, specification, or sample, because the same three sections can be built in many proportions. The net is also only one part of a working Danish seine. The method itself relies on long ropes that are shot out and hauled back to draw the gear together, and the vessel supplies the handling arrangement that sets and recovers it. That is why scope wording is worth reading closely. A description covering wings, net body, and codend is describing net sections, while ropes, floats, sinkers, hardware, and installation belong to a separate part of the specification. A commercial danish seine net manufacturer can supply a finished net assembly and still leave those items to be agreed on their own terms, and that is a normal arrangement rather than a gap. For practical reading, ask a simple question of any description: which modules are in the quoted item? If the answer is the three net sections, the scope is a net. If rings, ropes, or rigging appear, the item has moved up a level. This habit is useful when comparing wholesale danish seine fishing nets from several sources, because two quotes that look similar can cover different sets of parts. It also keeps a replacement project on track: when the goal is to reproduce a net already in service, a danish seine net supplier can work from the existing drawing, measurements, or a physical sample, and the module list tells everyone which pieces are being rebuilt.

Conclusion

Wings, net body, and codend are the three modules that carry a Danish seine net from a wide herding opening to a closed collecting bag. Reading the gear from the wing ends toward the codend, then following how the sections connect, gives a clear picture of what each part contributes to shape and to fish concentration. Keeping that module view separate from the assembly question is what makes a specification readable: the net sections, the ropes and hardware around them, and the vessel arrangement are three different layers, and each layer can be described on its own terms.

FAQ

Q: What is the codend in a Danish seine net?

A: The codend is the closed end section where the catch collects. It sits at the back of the net body, at the end of the taper, so fish guided through the body end up in a single holding area that can be lifted aboard. It is produced as its own section and joined to the body during assembly, with its size and mesh set by the net design.

Q: Are wings and net body separate sections of a Danish seine net?

A: Yes. Wings, net body, and codend are made individually and then joined into a finished net. The two wings form the outer edges, the body is the tapering middle panel group, and the codend is the collecting bag at the back. Treating them as separate modules makes it easier to see which parts a quote or specification covers.

Q: Does a finished Danish seine net assembly automatically include ropes and hardware?

A: Finished net assembly covers the net itself: wings, net body, and codend joined as one piece. Seine ropes, floats, sinkers, hardware, and installation sit outside that description and are agreed as separate specification items. Reading the scope line shows which of those items, if any, are part of the item being quoted.

Sources / References

FAO: Fishing Gear Types - Danish Seines

FAO: Fishing Gear Types - Seine Nets

Related Examples

PLFISHERY Danish Seine Net

Further Reading

FAO: Table of Contents

Leave a message
Name
Email *
Message
Message Us